If you have hardwood floors, there are a few things you need to know about hardwood and humidity levels to keep your floor in great shape.
Here's the Hardwood Golden Rule: With solid or engineered hardwoods, you should aim to keep humidity levels in your home between 35% and 55%.
Low Humidity Levels
If the humidity level drops below 35%, low moisture levels can be a problem. Low levels can cause the wood to dry out, which, in turn, could weaken the wood, causing the floor to splinter. It could also lead the floor to “check”, meaning that it could split along the grain. This can also damage the finish, which would become an issue during your regular maintenance.
High Humidity Levels
If the humidity hits above 55%, you're opening up a chance for moisture to seep into the wood. Too much moisture and the floor boards could begin to swell. This swelling can create pressure between the boards, which can cause the boards to warp or cup. This is true for both solid hardwoods and engineered hardwoods. Remember, while engineered hardwoods tend to be more stable than solid hardwoods, they are still susceptible to moisture.
Keeping Humidity Levels in Check
So how you can prevent potential damage? Check the humidity levels in the rooms where you have your hardwood floors installed using a hydrometer – they're available at Quality Floors. If the humidity levels are beyond the 35% – 55% range, then make adjustments. If the levels are too high, use a dehumidifier to lower the humidity levels. If you need to raise the humidity level, try a humidifier to boost the overall moisture in the room. These can either be installed right on your home furnace, or placed individually in rooms you wish to control the humidity in.
By maintaining the humidity levels in your home, you will help to ensure your floor remains covered by our warranties and keep it in shape to perform its best.
No comments:
Post a Comment